Paint Coverage per Gallon and per Litre

A short chart of published coverage rates. These are manufacturer-stated ranges at a stated film thickness, not a guarantee for every surface, and this page is not any brand’s official calculator.

Published coverage figures

One US gallon is 3.785411784 litres, and one square foot is 0.09290304 square metres. Converting 350–400 sq ft per US gallon gives about 8.6–9.8 m² per litre, which matches the metric band Sherwin-Williams prints on some data sheets (for example 8.58–9.81 m² per litre alongside 350–400 sq ft per gallon).

Source What it applies to Coverage About, in m²/L
Sherwin-Williams paint calculator FAQ Typical gallon of paint (planning statement) About 350–400 sq ft per US gallon About 8.6–9.8
Sherwin-Williams SuperPaint Interior Latex PDS Interior latex finish at 4 mils wet, 1.5 mils dry 350–400 sq ft per US gallon About 8.6–9.8
Sherwin-Williams Duration Exterior Acrylic Flat PDS Exterior acrylic at 5.3–6.4 mils wet, 2.2–2.7 mils dry 250–300 sq ft per US gallon About 6.1–7.4
Sherwin-Williams paint calculator FAQ Typical gallon of primer About 200–300 sq ft per US gallon About 4.9–7.4

Metric values in the last column are converted from the published US figures, except where a data sheet already lists both.

How to use the numbers

Gallons (or litres) of paint ≈ (paintable area × coats) ÷ coverage. Use a rate from the can or data sheet whenever you have it. The 350 sq ft/gal default on the interior paint calculator is the conservative end of the 350–400 interior range. The 250 sq ft/gal default on the exterior paint calculator is the conservative end of the Duration Exterior 250–300 range. Both fields are editable.

Coverage falls when the film is thicker, the surface is porous or rough, or the color change is severe. It rises when the film is thinner — which may not hide as well. A planning range is not a substitute for the product’s own spread rate.

Sources

Disclaimer: These tools give planning estimates only. Coverage, sheet sizes, batt dimensions, bag yields, and R-values vary by product, surface, installation, and climate. Always check the label or data sheet for the product you buy, and follow the adopted local building code and a qualified professional for any code-regulated, fire-rated, moisture, or structural work. Interior Reference is not a contractor, retailer, or building-code authority, and it does not replace manufacturer instructions or a licensed designer.