Estimate US Drywall Sheet Counts
Count gypsum panels for a rectangular room using US customary sheet sizes. This page is for US drywall (typically 4 ft wide panels). For UK plasterboard sizes in millimetres, use the plasterboard calculator instead.
Common US sheet sizes
USG Sheetrock Brand gypsum panel data lists panels that are 4 ft (48 in) wide, with 1/2 in and 5/8 in panels also available 54 in wide. Lengths in published product data include 8–14 ft on some sheets and 8–16 ft on others; local stock is often 8, 10, and 12 ft. Thicknesses commonly listed are 1/4, 3/8, 1/2, and 5/8 in. This calculator counts area only — it does not choose a fire-rated Type X panel, a ceiling panel, or a thickness for a rated assembly.
| Nominal sheet | Width × length | Face area |
|---|---|---|
| 4 × 8 ft | 4 ft × 8 ft | 32 sq ft |
| 4 × 10 ft | 4 ft × 10 ft | 40 sq ft |
| 4 × 12 ft | 4 ft × 12 ft | 48 sq ft |
| 4 × 14 ft | 4 ft × 14 ft | 56 sq ft |
| 54 in × 8 ft | 4.5 ft × 8 ft | 36 sq ft |
Face area is width × length. Availability of a given length or the 54 in width varies by product and supplier. Confirm the stack you are buying.
Worked example
A 12 ft × 10 ft room, 8 ft ceilings, walls and ceiling, two 3 ft × 6 ft 8 in doors and two 3 ft × 4 ft windows, 4 × 8 ft sheets, 10% planning waste. Walls = 352 sq ft, ceiling = 120 sq ft, openings = 64 sq ft, net = 408 sq ft. With 10% waste, 448.8 sq ft ÷ 32 = 14.03, which rounds up to 15 sheets.
Do not use these US customary sizes as if they were UK plasterboard. A 1200 × 2400 mm board is a metric product used on the plasterboard calculator.
Sources and notes
- USG Sheetrock Brand Gypsum Panels product data (for example submittal WB1473 and related catalog sheets): 1/4, 3/8, 1/2, and 5/8 in thicknesses; 48 in (4 ft) width; 1/2 in and 5/8 in also in 54 in width; lengths listed as 8–14 ft on some data and 8–16 ft on others. See also the USG Sheetrock Brand Gypsum Panels product page.
- The 10% waste field is a planning allowance you can edit or set to zero. It is not taken from a USG installation requirement.
Disclaimer: These tools give planning estimates only. Coverage, sheet sizes, batt dimensions, bag yields, and R-values vary by product, surface, installation, and climate. Always check the label or data sheet for the product you buy, and follow the adopted local building code and a qualified professional for any code-regulated, fire-rated, moisture, or structural work. Interior Reference is not a contractor, retailer, or building-code authority, and it does not replace manufacturer instructions or a licensed designer.