Estimate Insulation Batt Quantity
Count batts or rolls from the area you need to cover and the width and length of the batt you are buying. Choose an R-value from the package that matches the cavity, and use the R-value chart for climate-zone context.
Formula, example, and R-value
Example: a 20 ft × 12 ft area is 240 sq ft. Using 15 in × 93 in batts (9.69 sq ft each) and a 5% planning allowance, you need 240 × 1.05 ÷ 9.69 = 26.01 batts, which rounds up to 27.
This tool does not assign an R-value to a batt from thickness alone. ENERGY STAR’s DIY table uses 3.2 × depth in inches as an estimate for existing fiberglass batts, but new batts are sold with a labeled R-value (for example R-13 or R-19) that already assumes a stated thickness. A batt compressed into a shallower cavity will not deliver that labeled R-value. See the R-value chart for ENERGY STAR climate-zone targets, and the attic insulation calculator for blown-in bag estimates.
Sources and notes
- Batt area is ordinary width × length. Default 15 in and 23 in widths are the usual fit for 16 in and 24 in on-center cavities; 93 in is a common pre-cut length for an 8 ft wall after plates. Confirm the package.
- Existing-batt R estimate of 3.2 × inches: ENERGY STAR DIY Checks and Inspections.
- Recommended attic, floor, and wall levels: ENERGY STAR recommended R-values.
Disclaimer: These tools give planning estimates only. Coverage, sheet sizes, batt dimensions, bag yields, and R-values vary by product, surface, installation, and climate. Always check the label or data sheet for the product you buy, and follow the adopted local building code and a qualified professional for any code-regulated, fire-rated, moisture, or structural work. Interior Reference is not a contractor, retailer, or building-code authority, and it does not replace manufacturer instructions or a licensed designer.