Estimate Interior Paint for a Room

Work out wall and ceiling paint quantity for a rectangular room. The result is a planning estimate, not a specification and not a brand’s official calculator.

Calculator

Wall area is 2 × (length + width) × height. Ceiling area, if included, is length × width. Paint needed is (paintable area × coats) ÷ coverage. The default coverage of 350 sq ft per US gallon is the low end of the 350–400 sq ft range Sherwin-Williams describes as typical; change it to match the can.

Openings to subtract (optional)

Counts default to zero so nothing is subtracted until you add a door or window. The example sizes (a 3 ft × 6 ft 8 in door and a 3 ft × 4 ft window) are editable starting points, not required dimensions.

Formula and a worked example

For a rectangular room:

Wall area = 2 × (length + width) × height

Ceiling area = length × width

Paintable area = wall area + ceiling area (if included) − openings

US gallons = (paintable area × coats) ÷ coverage in sq ft per gallon

Litres = US gallons × 3.785411784. Results also show a whole-gallon round-up, because paint is commonly sold in quarts and gallons.

Example: a 12 ft × 10 ft room, 8 ft ceilings, walls only, two coats, coverage 350 sq ft/gal, two 3 ft × 6 ft 8 in doors (20 sq ft each) and two 3 ft × 4 ft windows (12 sq ft each). Walls = 2 × (12 + 10) × 8 = 352 sq ft. Openings = 40 + 24 = 64 sq ft. Net = 288 sq ft. Two coats need 576 sq ft of coverage, or 576 ÷ 350 = 1.65 US gallons (about 6.2 litres), which rounds up to 2 gallons.

Textured walls, patched drywall, dramatic color changes, and some primers need more paint. Sherwin-Williams lists primer coverage on the same FAQ as about 200–300 sq ft per gallon, which is a lower rate than finish paint. Enter the rate from the product you will actually apply.

Sources and notes

Disclaimer: These tools give planning estimates only. Coverage, sheet sizes, batt dimensions, bag yields, and R-values vary by product, surface, installation, and climate. Always check the label or data sheet for the product you buy, and follow the adopted local building code and a qualified professional for any code-regulated, fire-rated, moisture, or structural work. Interior Reference is not a contractor, retailer, or building-code authority, and it does not replace manufacturer instructions or a licensed designer.